const ( Magic32 uint32 = 0xfeedface Magic64 uint32 = 0xfeedfacf MagicFat uint32 = 0xcafebabe )
const ( FlagNoUndefs uint32 = 0x1 FlagIncrLink uint32 = 0x2 FlagDyldLink uint32 = 0x4 FlagBindAtLoad uint32 = 0x8 FlagPrebound uint32 = 0x10 FlagSplitSegs uint32 = 0x20 FlagLazyInit uint32 = 0x40 FlagTwoLevel uint32 = 0x80 FlagForceFlat uint32 = 0x100 FlagNoMultiDefs uint32 = 0x200 FlagNoFixPrebinding uint32 = 0x400 FlagPrebindable uint32 = 0x800 FlagAllModsBound uint32 = 0x1000 FlagSubsectionsViaSymbols uint32 = 0x2000 FlagCanonical uint32 = 0x4000 FlagWeakDefines uint32 = 0x8000 FlagBindsToWeak uint32 = 0x10000 FlagAllowStackExecution uint32 = 0x20000 FlagRootSafe uint32 = 0x40000 FlagSetuidSafe uint32 = 0x80000 FlagNoReexportedDylibs uint32 = 0x100000 FlagPIE uint32 = 0x200000 FlagDeadStrippableDylib uint32 = 0x400000 FlagHasTLVDescriptors uint32 = 0x800000 FlagNoHeapExecution uint32 = 0x1000000 FlagAppExtensionSafe uint32 = 0x2000000 )
ErrNotFat is returned from NewFatFile or OpenFat when the file is not a universal binary but may be a thin binary, based on its magic number.
var ErrNotFat = &FormatError{0, "not a fat Mach-O file", nil}
A Cpu is a Mach-O cpu type.
type Cpu uint32
const ( Cpu386 Cpu = 7 CpuAmd64 Cpu = Cpu386 | cpuArch64 CpuArm Cpu = 12 CpuArm64 Cpu = CpuArm | cpuArch64 CpuPpc Cpu = 18 CpuPpc64 Cpu = CpuPpc | cpuArch64 )
func (i Cpu) GoString() string
func (i Cpu) String() string
A Dylib represents a Mach-O load dynamic library command.
type Dylib struct {
LoadBytes
Name string
Time uint32
CurrentVersion uint32
CompatVersion uint32
}
A DylibCmd is a Mach-O load dynamic library command.
type DylibCmd struct {
Cmd LoadCmd
Len uint32
Name uint32
Time uint32
CurrentVersion uint32
CompatVersion uint32
}
A Dysymtab represents a Mach-O dynamic symbol table command.
type Dysymtab struct {
LoadBytes
DysymtabCmd
IndirectSyms []uint32 // indices into Symtab.Syms
}
A DysymtabCmd is a Mach-O dynamic symbol table command.
type DysymtabCmd struct {
Cmd LoadCmd
Len uint32
Ilocalsym uint32
Nlocalsym uint32
Iextdefsym uint32
Nextdefsym uint32
Iundefsym uint32
Nundefsym uint32
Tocoffset uint32
Ntoc uint32
Modtaboff uint32
Nmodtab uint32
Extrefsymoff uint32
Nextrefsyms uint32
Indirectsymoff uint32
Nindirectsyms uint32
Extreloff uint32
Nextrel uint32
Locreloff uint32
Nlocrel uint32
}
A FatArch is a Mach-O File inside a FatFile.
type FatArch struct {
FatArchHeader
*File
}
A FatArchHeader represents a fat header for a specific image architecture.
type FatArchHeader struct {
Cpu Cpu
SubCpu uint32
Offset uint32
Size uint32
Align uint32
}
A FatFile is a Mach-O universal binary that contains at least one architecture.
type FatFile struct {
Magic uint32
Arches []FatArch
// contains filtered or unexported fields
}
func NewFatFile(r io.ReaderAt) (*FatFile, error)
NewFatFile creates a new FatFile for accessing all the Mach-O images in a universal binary. The Mach-O binary is expected to start at position 0 in the ReaderAt.
func OpenFat(name string) (*FatFile, error)
OpenFat opens the named file using os.Open and prepares it for use as a Mach-O universal binary.
func (ff *FatFile) Close() error
A File represents an open Mach-O file.
type File struct {
FileHeader
ByteOrder binary.ByteOrder
Loads []Load
Sections []*Section
Symtab *Symtab
Dysymtab *Dysymtab
// contains filtered or unexported fields
}
func NewFile(r io.ReaderAt) (*File, error)
NewFile creates a new File for accessing a Mach-O binary in an underlying reader. The Mach-O binary is expected to start at position 0 in the ReaderAt.
func Open(name string) (*File, error)
Open opens the named file using os.Open and prepares it for use as a Mach-O binary.
func (f *File) Close() error
Close closes the File. If the File was created using NewFile directly instead of Open, Close has no effect.
func (f *File) DWARF() (*dwarf.Data, error)
DWARF returns the DWARF debug information for the Mach-O file.
func (f *File) ImportedLibraries() ([]string, error)
ImportedLibraries returns the paths of all libraries referred to by the binary f that are expected to be linked with the binary at dynamic link time.
func (f *File) ImportedSymbols() ([]string, error)
ImportedSymbols returns the names of all symbols referred to by the binary f that are expected to be satisfied by other libraries at dynamic load time.
func (f *File) Section(name string) *Section
Section returns the first section with the given name, or nil if no such section exists.
func (f *File) Segment(name string) *Segment
Segment returns the first Segment with the given name, or nil if no such segment exists.
A FileHeader represents a Mach-O file header.
type FileHeader struct {
Magic uint32
Cpu Cpu
SubCpu uint32
Type Type
Ncmd uint32
Cmdsz uint32
Flags uint32
}
FormatError is returned by some operations if the data does not have the correct format for an object file.
type FormatError struct {
// contains filtered or unexported fields
}
func (e *FormatError) Error() string
A Load represents any Mach-O load command.
type Load interface {
Raw() []byte
}
A LoadBytes is the uninterpreted bytes of a Mach-O load command.
type LoadBytes []byte
func (b LoadBytes) Raw() []byte
A LoadCmd is a Mach-O load command.
type LoadCmd uint32
const ( LoadCmdSegment LoadCmd = 0x1 LoadCmdSymtab LoadCmd = 0x2 LoadCmdThread LoadCmd = 0x4 LoadCmdUnixThread LoadCmd = 0x5 // thread+stack LoadCmdDysymtab LoadCmd = 0xb LoadCmdDylib LoadCmd = 0xc // load dylib command LoadCmdDylinker LoadCmd = 0xf // id dylinker command (not load dylinker command) LoadCmdSegment64 LoadCmd = 0x19 LoadCmdRpath LoadCmd = 0x8000001c )
func (i LoadCmd) GoString() string
func (i LoadCmd) String() string
An Nlist32 is a Mach-O 32-bit symbol table entry.
type Nlist32 struct {
Name uint32
Type uint8
Sect uint8
Desc uint16
Value uint32
}
An Nlist64 is a Mach-O 64-bit symbol table entry.
type Nlist64 struct {
Name uint32
Type uint8
Sect uint8
Desc uint16
Value uint64
}
Regs386 is the Mach-O 386 register structure.
type Regs386 struct {
AX uint32
BX uint32
CX uint32
DX uint32
DI uint32
SI uint32
BP uint32
SP uint32
SS uint32
FLAGS uint32
IP uint32
CS uint32
DS uint32
ES uint32
FS uint32
GS uint32
}
RegsAMD64 is the Mach-O AMD64 register structure.
type RegsAMD64 struct {
AX uint64
BX uint64
CX uint64
DX uint64
DI uint64
SI uint64
BP uint64
SP uint64
R8 uint64
R9 uint64
R10 uint64
R11 uint64
R12 uint64
R13 uint64
R14 uint64
R15 uint64
IP uint64
FLAGS uint64
CS uint64
FS uint64
GS uint64
}
A Reloc represents a Mach-O relocation.
type Reloc struct {
Addr uint32
Value uint32
// when Scattered == false && Extern == true, Value is the symbol number.
// when Scattered == false && Extern == false, Value is the section number.
// when Scattered == true, Value is the value that this reloc refers to.
Type uint8
Len uint8 // 0=byte, 1=word, 2=long, 3=quad
Pcrel bool
Extern bool // valid if Scattered == false
Scattered bool
}
type RelocTypeARM int
const ( ARM_RELOC_VANILLA RelocTypeARM = 0 ARM_RELOC_PAIR RelocTypeARM = 1 ARM_RELOC_SECTDIFF RelocTypeARM = 2 ARM_RELOC_LOCAL_SECTDIFF RelocTypeARM = 3 ARM_RELOC_PB_LA_PTR RelocTypeARM = 4 ARM_RELOC_BR24 RelocTypeARM = 5 ARM_THUMB_RELOC_BR22 RelocTypeARM = 6 ARM_THUMB_32BIT_BRANCH RelocTypeARM = 7 ARM_RELOC_HALF RelocTypeARM = 8 ARM_RELOC_HALF_SECTDIFF RelocTypeARM = 9 )
func (r RelocTypeARM) GoString() string
func (i RelocTypeARM) String() string
type RelocTypeARM64 int
const ( ARM64_RELOC_UNSIGNED RelocTypeARM64 = 0 ARM64_RELOC_SUBTRACTOR RelocTypeARM64 = 1 ARM64_RELOC_BRANCH26 RelocTypeARM64 = 2 ARM64_RELOC_PAGE21 RelocTypeARM64 = 3 ARM64_RELOC_PAGEOFF12 RelocTypeARM64 = 4 ARM64_RELOC_GOT_LOAD_PAGE21 RelocTypeARM64 = 5 ARM64_RELOC_GOT_LOAD_PAGEOFF12 RelocTypeARM64 = 6 ARM64_RELOC_POINTER_TO_GOT RelocTypeARM64 = 7 ARM64_RELOC_TLVP_LOAD_PAGE21 RelocTypeARM64 = 8 ARM64_RELOC_TLVP_LOAD_PAGEOFF12 RelocTypeARM64 = 9 ARM64_RELOC_ADDEND RelocTypeARM64 = 10 )
func (r RelocTypeARM64) GoString() string
func (i RelocTypeARM64) String() string
type RelocTypeGeneric int
const ( GENERIC_RELOC_VANILLA RelocTypeGeneric = 0 GENERIC_RELOC_PAIR RelocTypeGeneric = 1 GENERIC_RELOC_SECTDIFF RelocTypeGeneric = 2 GENERIC_RELOC_PB_LA_PTR RelocTypeGeneric = 3 GENERIC_RELOC_LOCAL_SECTDIFF RelocTypeGeneric = 4 GENERIC_RELOC_TLV RelocTypeGeneric = 5 )
func (r RelocTypeGeneric) GoString() string
func (i RelocTypeGeneric) String() string
type RelocTypeX86_64 int
const ( X86_64_RELOC_UNSIGNED RelocTypeX86_64 = 0 X86_64_RELOC_SIGNED RelocTypeX86_64 = 1 X86_64_RELOC_BRANCH RelocTypeX86_64 = 2 X86_64_RELOC_GOT_LOAD RelocTypeX86_64 = 3 X86_64_RELOC_GOT RelocTypeX86_64 = 4 X86_64_RELOC_SUBTRACTOR RelocTypeX86_64 = 5 X86_64_RELOC_SIGNED_1 RelocTypeX86_64 = 6 X86_64_RELOC_SIGNED_2 RelocTypeX86_64 = 7 X86_64_RELOC_SIGNED_4 RelocTypeX86_64 = 8 X86_64_RELOC_TLV RelocTypeX86_64 = 9 )
func (r RelocTypeX86_64) GoString() string
func (i RelocTypeX86_64) String() string
A Rpath represents a Mach-O rpath command.
type Rpath struct {
LoadBytes
Path string
}
A RpathCmd is a Mach-O rpath command.
type RpathCmd struct {
Cmd LoadCmd
Len uint32
Path uint32
}
type Section struct {
SectionHeader
Relocs []Reloc // Go 1.10
// Embed ReaderAt for ReadAt method.
// Do not embed SectionReader directly
// to avoid having Read and Seek.
// If a client wants Read and Seek it must use
// Open() to avoid fighting over the seek offset
// with other clients.
io.ReaderAt
// contains filtered or unexported fields
}
func (s *Section) Data() ([]byte, error)
Data reads and returns the contents of the Mach-O section.
func (s *Section) Open() io.ReadSeeker
Open returns a new ReadSeeker reading the Mach-O section.
A Section32 is a 32-bit Mach-O section header.
type Section32 struct {
Name [16]byte
Seg [16]byte
Addr uint32
Size uint32
Offset uint32
Align uint32
Reloff uint32
Nreloc uint32
Flags uint32
Reserve1 uint32
Reserve2 uint32
}
A Section64 is a 64-bit Mach-O section header.
type Section64 struct {
Name [16]byte
Seg [16]byte
Addr uint64
Size uint64
Offset uint32
Align uint32
Reloff uint32
Nreloc uint32
Flags uint32
Reserve1 uint32
Reserve2 uint32
Reserve3 uint32
}
type SectionHeader struct {
Name string
Seg string
Addr uint64
Size uint64
Offset uint32
Align uint32
Reloff uint32
Nreloc uint32
Flags uint32
}
A Segment represents a Mach-O 32-bit or 64-bit load segment command.
type Segment struct {
LoadBytes
SegmentHeader
// Embed ReaderAt for ReadAt method.
// Do not embed SectionReader directly
// to avoid having Read and Seek.
// If a client wants Read and Seek it must use
// Open() to avoid fighting over the seek offset
// with other clients.
io.ReaderAt
// contains filtered or unexported fields
}
func (s *Segment) Data() ([]byte, error)
Data reads and returns the contents of the segment.
func (s *Segment) Open() io.ReadSeeker
Open returns a new ReadSeeker reading the segment.
A Segment32 is a 32-bit Mach-O segment load command.
type Segment32 struct {
Cmd LoadCmd
Len uint32
Name [16]byte
Addr uint32
Memsz uint32
Offset uint32
Filesz uint32
Maxprot uint32
Prot uint32
Nsect uint32
Flag uint32
}
A Segment64 is a 64-bit Mach-O segment load command.
type Segment64 struct {
Cmd LoadCmd
Len uint32
Name [16]byte
Addr uint64
Memsz uint64
Offset uint64
Filesz uint64
Maxprot uint32
Prot uint32
Nsect uint32
Flag uint32
}
A SegmentHeader is the header for a Mach-O 32-bit or 64-bit load segment command.
type SegmentHeader struct {
Cmd LoadCmd
Len uint32
Name string
Addr uint64
Memsz uint64
Offset uint64
Filesz uint64
Maxprot uint32
Prot uint32
Nsect uint32
Flag uint32
}
A Symbol is a Mach-O 32-bit or 64-bit symbol table entry.
type Symbol struct {
Name string
Type uint8
Sect uint8
Desc uint16
Value uint64
}
A Symtab represents a Mach-O symbol table command.
type Symtab struct {
LoadBytes
SymtabCmd
Syms []Symbol
}
A SymtabCmd is a Mach-O symbol table command.
type SymtabCmd struct {
Cmd LoadCmd
Len uint32
Symoff uint32
Nsyms uint32
Stroff uint32
Strsize uint32
}
A Thread is a Mach-O thread state command.
type Thread struct {
Cmd LoadCmd
Len uint32
Type uint32
Data []uint32
}
A Type is the Mach-O file type, e.g. an object file, executable, or dynamic library.
type Type uint32
const ( TypeObj Type = 1 TypeExec Type = 2 TypeDylib Type = 6 TypeBundle Type = 8 )
func (t Type) GoString() string
func (t Type) String() string